Installation & Maintain of Thermostatic Shower Valves
1. clear the pipeline debris and sewage before install thermostatic shower valves;
2. Thermostatic shower valves are testing prior to commissioning is completed bfore spool factory, do not disassemble thermostatic shower valves by yourself;
3. Do not reverse the hot and cold water pipes;
4. Ultra-high pressure (5.0kg/cm) shall be fitted with pressure relief valve;
5. After installed thermostatic shower valves, please check for any leaks in the connecting parts;
6. Simply adjust the knob to cold water when transferred to the location under 20, location is strictly prohibited more than place;
7. When thermostat to the security control of the handle counter clockwise limit, press the safety button to rotate 38 degrees to the desired temperature, the temperature can be established by the outflow of mixed water;
8. Please turn the knob of thermostatic shower valves gently when you are using, do not need excessive force so as to avoid unnecessary damage;
9. When pressed the security control button of thermostatic shower valves, it should be slowly raised the temperature, so as not to raise the water temperature is too high too fast to cause discomfort.